[WorkLog] Project Scarlet|Ti

[kmp-cooling]

New up!

To enter the new mask for the three fans I had to cut away this part:

To cut it I removed the blade from the hacksaw and holding it in his hand, I cut.
This is because with the detached blade could easily reach the edge, but I will not recommend it highly.

This is the result! I know it's not much, but don't worry I'm working on the mod, or better a couple of things that I need for the mod!
For example the restructuring of the cellar, creating a painting booth home made, at least I have a place where I can work in peace!

Currently I have gone on to the pieces of CAD! As soon as I finish the ideas, I'll post something!

In the next days new up!

 

[kmp-cooling]

Here I am with a new up!


Today I painted the cover of the PSU!

First a base coat, after cleaning the piece and sanded

Then down to paint!

Now the part is ready to be mounted!

Very satisfied with the painting

You like? How is now the case?

Now I go a week in Barcelona, when I get back important news! :icon_cool:

At the next UP!

 

[jrheuwing]

Great job. Keep up the good work.

 

[kmp-cooling]

Guys, you thought of be rid of me, and yet here I'm back to Barcelona !!

Soon New UP!

Stay Tuned!

 

[kmp-cooling]

Guys today I opened the Facebook page of my mod. On the page will be published updates and my build complete!
Obviously Like pls :icon_smile:

https://www.facebook.com/2kProModdingProject

 

[kmp-cooling]

NEW UP!

To make room for the radiator front that will insert with 6 fans in push / pull and not to stand too close to the PSU, I had to drill at a distance about halfway between the last and second last hole factory in this case!
Here are pictures

Holes made with a bit of trouble because I was quite uncomfortable for drilling

Well the carbon films make good

Here is the first hdd makes his entrance

Hope you like it! As always, comments and suggestions are always appreciated!

At the next UP!

 

[Hightower]

Looks stunning, nice job.

 

[kmp-cooling]

Looks stunning, nice job.

Thanks

New up!

To enter the new mask for the three fans I had to cut away this part:

To cut it I removed the blade from the hacksaw and holding it in his hand, I cut.
This is because with the detached blade could easily reach the edge, but I will not recommend it highly.

This is the result! I know it's not much, but don't worry I'm working on the mod, or better a couple of things that I need for the mod!
For example the restructuring of the cellar, creating a painting booth home made, at least I have a place where I can work in peace!


Currently I have gone on to the pieces of CAD! As soon as I finish the ideas, I'll post something!

In the next days new up!

 

[kmp-cooling]

UP

We begin !!

Photos because of the light and of my poor ability with the camera have given birth these colors :huh:
Live makes much better!

This is the grid! I must say that I like very much because of the contrasting black and red! I thought worse! Then viewed from above can see very well the color red, as we tilts toward the edges less and less Same principle of TN panels ahahahah

Here's the last picture! Believe me that the colors are much more beautiful

Guys I hope that with this last one up wholly follow you Obviously guys aspect advice and your opinions! Even tips on how to improve the build and advice on how to make better pictures!

 

[kmp-cooling]

The first sponsor is one of the BIG in this build, here's a preview! Tomorrow unboxing! What do you think it contain?

 

[kmp-cooling]

Thanks Corsair for the trust you have placed in my project and especially thank you JON, without him this wouldn't have been possible!

Exceptional products! Unquestionable quality. As you saw, I received power 1000W Platinum + Corsair Link + 2 RGB LED strips + Various cables.
I'm very happy because it's my first build and get the trust of a big company like Corsair, for me it means a lot!
Thanks to all of you to follow my project, because also without your support I wouldn't have succeeded!


Thanks CORSAIR!

 

[kmp-cooling]

Well guys NEW UP!

I painted the lateral bulkhead of the case, that's because I didn't like keep it all black

Start with the masking of edges!

Let to dry

And here's the result! Hope you like it!

 

[kmp-cooling]

New UP!

I would remind you guys to leave like on my FB page!

https://www.facebook...oModdingProject

For you it's only a like, for me is valorisation of my work/creations. Thanks at all for your support!

Spoiler

That's my signature, will be cut with laser on the front panel, bottom right!

What do you think?

 

[kmp-cooling]

Here I'm back with a BIG Up!


Has arrived almost any material of this sponsor, it's missing only the mouse that wasn't available. It will be provided later and will also be the subject of modding
But now we move on to serious matters!

Thanks CoolerMaster for the trust you have placed in my project and especially thank you ALESSANDRO E VINCENZO, without they this wouldn't have been possible!


Now the Pictures!

See you soon at the next up

 

[kmp-cooling]

Other BIG Up!


First of all, I remaind you leave a like on my FB PAGE! Thanks for your help!

https://www.facebook.com/2kProModdingProject


Let's start!

That's all guys!

 

[kmp-cooling]

NEW UP

As I said I was in work in progress for the work in the cellar .. We almost finished restoring

I had some material in surplus, and so I decided to create a spray booth

I created using scrap pieces of wood, metal and plasterboard!

The orange parts are the simple tape to protect the wires!

Internally we have used glass wool to be glued to the plasterboard, to ensure that the dusts of the paint adhering to the surface and do not flutter on the piece.
The wall behind was made with plasterboard to cover the wall and keep it safe.

If you see before we tried with the spray glue, but it was drunk from plasterboard, then we switched to the option B

Good old silicone

To adhere the glass wool at the side of iron, we have drilled the metal pieces to pass the wires and hold the glass wool anchored on three points

With some mishap and various fix with what I had in the cellar

We have stretch a braided metal cable to carry the weight of the hanging pieces and so we set like this:

Internally set like this:

And here's the final result:

Aesthetically it's not much, but at a functional level is the best that I could create with what I had .. Cost = 0
I just have to buy two or three aluminum trays to be put on the table and fill them with water, to gather dust that falls while I paint and then periodically change the water and / or trays!
Keep in mind the negligible cost of the trays € 0.30 each one ..
I thought of a vacuum cleaner, but it cost me more and then I live in an apartment building .. I can not take a cab industry in the cellar, otherwise other people cause me problems ..

I Aspect your comments and opinions !!

That's all for now!

 

[kmp-cooling]

New UP!
Gentlemen, new arrivals in 2k Pro home! For the happiness of my wallet

These are sponsored by Me

Here is my latest purchase, I present my new modding partner
New Silhouette Cameo

A big man with a great message:

Comments and opinions are always welcome! Does anyone have experience with this machine?
Here is a video that shows the use of an expert !! JAMES WALTER

 

[kmp-cooling]

New Update!

New SPONSOR and New PARTNER of 2kPro Modding Projects!


Tomorrow I will upload photos of the material came from mom BitFenix
Needless to say that the quality is visible at the opening of the box
Small preview! Obviously appreciated

 

[kmp-cooling]

Thanks BitFenix for the trust you have placed in my project and especially thank you UMBERTO, without him this wouldn't have been possible!

Inside, many beautiful things

General Overview! But now we go into detail!

They look like general LED strips, but they aren't Since I'm an eternal undecided, I opted for the magnetic strips So I can experiment to good light effect in my mod

Then I chose the Spectre LED PWM for the front of the mod! They will give that extra touch to the mod, without affecting the performance

And finally the Spectre Pro PWM

Gentlemen for this first overview is all! I, as always, invite you to leave a like on facebook, for those who had not yet done! For you are a few seconds for me it means further enhance my work


https://www.facebook.com/2kProModdingProject


Thanks to all! At the next UP!

 

[kmp-cooling]

Hello to all guys! I finished work on the new home page of the mod! See it on the first page!


Hope you like it! Comment if you like it or not If you don't like it, tell me what you would better!


Please support me on FB Page!


https://www.facebook.com/2kProModdingProject/