• Vragen? Wacht niet langer op de antwoorden! Login of Registreer en plaats jouw vraag! Wij zullen je vragen z.s.m. beantwoorden.

[WorkLog] Project Scarlet|Ti


New member
Laatst bewerkt:
Small UP!




As you can see I had to move the cage inside of HDD, for reasons of space, since in the front I will install a radiator 360! I think I do later the holes. because those in case are not useful; so I can place the port HDD to a fair distance between the radiator and the power supply!

Now beginning to mask all the pieces and then paint it!





All for now! Stay tuned! :D
Other UP!

Finally paint! I used a red metallic paint which comes closest to the Red Scarlet, I hope to look good color! Unfortunately from the photos the color is not exactly what it seems!
When I'll finish the work, I will do the photos with reflex and lights!









I really like the color, I don't know you! Let me know! :023:

Thanks! :D

Here is a Big Up as I promised! :D


I unplugged, with the hair dryer, the label from hdd, I took me some time to not throw too much heat on the HDD, then to soften the glue have been there a good 5 minutes!


Then I put on the kit box of screwdrivers, the adhesive because I didn't know which on the surface to keep it for not to make him completely lose adhesiveness :)



I masked the HDD to paint it quietly and then cut the upper ribbon with the cutter precision to cover only the part in relief and the inputs of the screws! Getting what you see in the picture above!


Here I gave a primer because it did not take paint well, in fact I had to removing paint and do it again!


Black paint!


That's what I obtained! The edges could not come better than this! Then I touched up by hand with a brush and paint spray!



Now it masks the contrary! And so red!


Here cutter precision I gently removed the tape paper after first warmed a bit with the hair dryer! Always better to warm it up a bit 'otherwise you risk that take away the paint below!


Removed the first piece, no damage to the paint! :D


Removing the second piece, painted screws and glued the adhesive after heating it! I put a pinch of attack where it didn't adhere! Usually it doesn't adhere on the tip that one removes first!


Here's the finished result! I hope you like it! If you have suggestions for improving the quality of workmanship didn't hesitate to tell me! I'm curious of your opinion! :)

For the moment it's all about! At the next UP! :D
Here is another UP!

As I said the hdd were 2! Here's the second, I hope you like it!

The process was much the same as the first HDD!


I removed the adhesive, screws etc. to paint! I gave HDD the red and then a masked only time the part that I wanted to keep the red! So I saved masking process that could ruin the paint once detached!




There it cames back from the cellar with a new look!



And finally here it is more beautiful than before, one hopes

Let me know if you like and which of the two HDD favorite! Personally I prefer the latter

I like the latter as well (but with the same comment about the sticker ;)).

I know! Thanks a lot! :D

New UP!


It 's time to see how it came the painting!


I really like it :D



Here I had to remove the dust filter and put it behind the red grid, otherwise you could not see much of a red! Then with the simple Vinavil glue I glued it all!


Here's the finished result! I know it's different from the render I did, in which I had removed the black grid above, but I have to say that so I like more :)

All for today people! At the next UP! :D
New UP!

I would say to start!

We see the bars as they came! :)


I must say I really like it! Color is what I wanted



Here I decided to paint the screws to give contrast to the black rubber pads!

Now to the castle of HDD!





Here I put the carbon film, not on top of everything, but doing "motif" decorating only a few parts! Hope you like it!

Soon with New UP!
New UP!

Let's take a new look inside the case! Or at least let's try


This is the before





This is after!

I must say that I struggled quite a bit to work without removing the rivets of the case! What a great labor, I tried to be as accurate as possible! What do you say?
Vergelijkbare onderwerpen
Onderwerp starter Titel Forum Reacties Datum
C [Worklog]cosmos pure black crosshair republic of gamers Gallery & Build Logs 18
Brutus Brutus Wc Setup Worklog Gallery & Build Logs 39
vincent Worklog lian PC-P80 Gallery & Build Logs 61
stravinski stravinski's worklog Gallery & Build Logs 8
MrGiorgio Gio's waterkoeling worklog Gallery & Build Logs 74
iSP Project muziekstreamer Gallery & Build Logs 8
ThomasJS Project SteelOak Gallery & Build Logs 12
Bl4ckj4ck666 Project Antec P120 crystal Gallery & Build Logs 22
Mannekino Custom loop kerstvakantie project in O11 Dynamic XL voltooid met Direct Die cooling voor een 9900K Gallery & Build Logs 9
Tath Project D Gallery & Build Logs 91
tijgervarken Project Ti[ger]tanium Gallery & Build Logs 1
Silversurfer Even voorstellen: Project Silversurfer Evo Introductie: Stel jezelf en jouw PC voor 1
M mindwarper - Chris - AMD Ryzen 3000/5000 Project Introductie: Stel jezelf en jouw PC voor 4
iSP Geschikte waterkoeling cpu bracket gezocht voor project Overige Koeling 7
Bokeh Bokeh - Ben - mijn monster PC project met RGB Introductie: Stel jezelf en jouw PC voor 11
Subarist [BIP] Project X | Scratchbuild | Gallery & Build Logs 0
Subarist | BIP | Project Subi | Personal Case | PCFixerLimburg Gallery & Build Logs 15
Subarist Subarist - Maickel - Project Subi Introductie: Stel jezelf en jouw PC voor 9
Rammstation Even voorstellen : Rammstation project: Rammstation Introductie: Stel jezelf en jouw PC voor 7
Dima Dima - Project: 7980xe Custom Loop Introductie: Stel jezelf en jouw PC voor 8
987Overlord 987Overlord - Paul - Project: Beest Introductie: Stel jezelf en jouw PC voor 5
vincent Project Back in busines Gallery & Build Logs 42
Kevin Kevin - Kevin - Project: Kraken Introductie: Stel jezelf en jouw PC voor 6
Hightower Project S Gallery & Build Logs 6
anub1s18 NZXT H440 project overkill Gallery & Build Logs 5
PasLis Project Car Gallery & Build Logs 29
vincent Project "vocht probleem" Gallery & Build Logs 9
Maarten/Pine Scratch-build ''Project Metallurgy'' Gallery & Build Logs 36
iSP [Gezocht] Simpel (goedkoop) ITX bordje voor project Gevonden 4
bunbun casemod project "red elegance" Gallery & Build Logs 11
Y Yodabear - Maikel - Project: LeBlanc Tower Introductie: Stel jezelf en jouw PC voor 5
C Corsair Crystal 570x Project 'Hot Rod' Gallery & Build Logs 0
C Sven Decommer - Project Blue-Ice Gallery & Build Logs 4
C Sven Decommer - Project Blue-Ice Introductie: Stel jezelf en jouw PC voor 1
P Project simply black & white Gallery & Build Logs 5
Maarten/Pine Project Cu - a watercooled PC desk Gallery & Build Logs 52
tijgervarken Project Black Matter Gallery & Build Logs 23
M Project reDefine R5 Cases en Modding 0
ProAce Project 303 Gallery & Build Logs 16
M [Build Log] Project Blueberry Apple G4 Cases en Modding 24
BeckModZ [Project Log] "Blue Morpho" Gallery & Build Logs 34
Demolisher Kodiak [Long term project] Cases en Modding 45
T Hulp bij budget waterkoeling project. Advies Waterkoeling Setup 2
T Hulp bij toekomstig project Waterkoeling 0
F Builg log Project Saber Gallery & Build Logs 4
bmawn [Project log] Project Dark Knightmare Gallery & Build Logs 31
FactoryDefaults Project Stormtrooper Gallery & Build Logs 30
J Project minimal. Gallery & Build Logs 9
DBRichard Project Deadpool: Merc with a Mouth Gallery & Build Logs 41
S Project ICE - (custom PC Desk Build) Gallery & Build Logs 4

Vergelijkbare onderwerpen