Pharlap
New member
0. Volledige naam van het product?
Innovatek AGB-O-Matic - Eheim 1046/1048 Reservoir Blue
1. Op welke datum heb jij het product gekocht?
Ongeveer 6maanden geleden
2. Hoelang heb jij het product in gebruik gehad?
Niet lang, alleen mee gestest
3. Waarom wil jij het verkopen?
Andere setup
4. Is de aankoop bon/factuur nog aanwezig?
Ja, moet ik nog opzoeken
5. In welke staat verkeert het product?
Nieuw
6. Zijn de accessoires nog aanwezig? (Boekjes, cd's etc.)
nvt
7. Wat is je richtprijs?
Vraagprijs:€ 15,-
Innovatek AGB-O-Matic - Eheim 1046/1048 Reservoir Blue
The AGB-o-Matic simplifies filling and ventilation of a water cooling system. It is attached directly to the EHEIM pumps and makes a water holding reservoir, from which the pump can suck in directly and air-free. This tank's internal design makes for extremely efficient air bubble removal.
Despite the compact design of 50x56x120mm (lxbxh) it makes a large volume of water available.
The water cooling system is filled after the assembly by the opening at the top side (yellow screw cap)
The AGB o Matic consists of extremely sturdy special plastic, is very compact and optimally coordinated with the Eheim 1046 and 1048 pumps (won't fit other Eheim models). Mates water-tight to the pump's intake stem via two rubber O rings.
The water return is equipped with a standard 8mm compression fitting.
Technical data:
Weight: 110g
Material: high-strength special plastic
Size (without pump): (lxbxh) 50x56x120 mm
suitably for EHEIM 1046 and 1048
Innovatek AGB-O-Matic - Eheim 1046/1048 Reservoir Blue
1. Op welke datum heb jij het product gekocht?
Ongeveer 6maanden geleden
2. Hoelang heb jij het product in gebruik gehad?
Niet lang, alleen mee gestest
3. Waarom wil jij het verkopen?
Andere setup
4. Is de aankoop bon/factuur nog aanwezig?
Ja, moet ik nog opzoeken
5. In welke staat verkeert het product?
Nieuw
6. Zijn de accessoires nog aanwezig? (Boekjes, cd's etc.)
nvt
7. Wat is je richtprijs?
Vraagprijs:€ 15,-
Innovatek AGB-O-Matic - Eheim 1046/1048 Reservoir Blue
The AGB-o-Matic simplifies filling and ventilation of a water cooling system. It is attached directly to the EHEIM pumps and makes a water holding reservoir, from which the pump can suck in directly and air-free. This tank's internal design makes for extremely efficient air bubble removal.
Despite the compact design of 50x56x120mm (lxbxh) it makes a large volume of water available.
The water cooling system is filled after the assembly by the opening at the top side (yellow screw cap)
The AGB o Matic consists of extremely sturdy special plastic, is very compact and optimally coordinated with the Eheim 1046 and 1048 pumps (won't fit other Eheim models). Mates water-tight to the pump's intake stem via two rubber O rings.
The water return is equipped with a standard 8mm compression fitting.
Technical data:
Weight: 110g
Material: high-strength special plastic
Size (without pump): (lxbxh) 50x56x120 mm
suitably for EHEIM 1046 and 1048
Laatst bewerkt:
