EK-FB ASUS M6I water block is a complete all-in-one (CPU and motherboard)
liquid cooling solution for Intel LGA-1150 socket Haswell CPU and ASUS Maximus VI Impact and Maximus VII Impact motherboards.
This water block uses award winning
EK-Supremacy cooling engine to ensure best possible CPU cooling. The water blocks directly cools Intel LGA-1150 socket type CPU, Intel Z87/Z97 Express southbridge (PCH) and power regulation (VRM / MOSFETs) module as water flows directly over all critical areas. It is a very high flow water block that can be easily used with systems using weaker water
pumps.
Base of the waterblock is made of nickel plated electrolytic copper while the top is made of quality acrylic glass material. The sealing is performed by quality rubber gaskets. Plexi top variants feature two slots for easy installation of 3mm LED diodes.
Water block is mounted with enclosed M2.5x4-, M3x6- and M4x10 DIN7985 screws and PVC washers and utilizes the factory provided MOSFET backplate. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation.
EK also encloses
EK-LGA 115x TRUE Backplate to ensure even contact with the CPU as well as to prevent motherboard warping.
Enclosed thermal pad is used on voltage regulator modules to improve cooling performance of the waterblock. On the CPU and southbridge (PCH) chip please use the enclosed electrically non-conductive thermal grease
EK-TIM Ectotherm.
Enclosed:
- water block
- mounting mechanism
-
EK-LGA 115x TRUE Backplate
- thermal grease
EK-TIM Ectotherm (1g)
-
thermal pads
Fittings are not enclosed! Two
fittings are needed for proper operation.
Made in Slovenia - Europe!
PLEASE NOTE:
- Fittings are not included! Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site.
