• Vragen? Wacht niet langer op de antwoorden! Login of Registreer en plaats jouw vraag! Wij zullen je vragen z.s.m. beantwoorden.

[Project Log] "Blue Morpho"

BeckModZ

New member
banner%20blue%20morpho_zps7y9qbqq4.jpg



It's Build Time Again !!


Hi Guys,


Finally time to start a new project!


This time i bought an In-Win D-Frame Mini case, and started brainstorming about the Design layout.
Usually when i am about to start a new project, i just go crazy on google and search for all kinds of stuff,
and this time i fell upon an image of a beautifull Blue butterfly sitting on a bunch of small white rocks..
And BOOM there it was, my head was loving the white and blue colors, and it didnt take me long to make an image collage of all the hardware and designs i wanted for this build.


I knew i didnt just want the Red D-frame to be standard, and found some inspiration from B-negative's LUMO build (AMAZING BUILD!)..
I then contacted my good friends at Parvum Systems, and came up with a nice reservoir design to replace the existing mainboard tray.
(Rendering teaser below)


Render%20MED%20SPONSOR%20LOGOER_zpssis4x1xd.jpg



So thats the reservoir/mainboard tray idea :)
The plan is to run the tubing from the watercooled parts into the reservoir, and the water will flow through the tunnels in the res tray, making use of as little bends and tubing as possible.


Also, I am not a big fan of just standard GPU mounting options, and like to do whatever i can to place the GPU any other place that makes the beautifull water block visible instead.
This time i will try to flip the GPU and mount it on the PSU housing, making the GPU Waterblock fully visible.


The D-Frame mini case itself, is going to get powder coated white, or at least thats the idea so far.
maybe i will change the color later on or do something else mixing white and blue :)


That should be enough info for a start :)


Status updates and Build Progress links will be further down in this post, and will be updated everytime i upload new images :)


OOH WAIT .. allmost forgot.. the name for this project is "Blue Morpho" the name of the butterfly i found :)..





Just a small "What to come" Teaser :)


teaser_zpsqxnospha.jpg



Everything in the Blue Morpho is going to be watercooled with parts from EKWB.com,
the fluids is from Mayhems.co.uk, The Mainboard is from Gigabyte Nordic,
Caseking.de and Super Flower handed over the 1000w Power Supply for this build,
And all the PSU sleeving is from MainframeCustom.com, and again Parvum Systems is the shizzle when it comes to custom parts!
Also E22.biz did some small parts for the build, the finishing touches :)


-------------------------------------------------------------------------------------------------


Progress Links :

The First Renderings

The D-Frame Mini Before Paint

The Hardware

The Sleeving

The New Gpu Mount

The Supremacy Evo and Ek-Ram Monarch x2

The EK-FC970 ACX Nickel GPU Block

The EKWB Fittings, Coolstream PE240 and GPU Backplate

The EK Vardar Fans Before Paint

Ek Vardar Fans After Paint

Monarch Module And EK-Supremacy Evo before and After paint

Mayhems Pastel Blue

Mounting the EK-Ram modules, and the EK-Ram Monarch x2

Some Goodies On The Way

The DDC Pump, And New Footstands From In Win

Painting The IN WIN D-Frame Mini

IN WIN D-Frame Mini After Paint

Gpu Mount Test, with Waterblock

Engraved And Custom Parts

Installing the engraved PSU Covers and more

Sleeving the EK-DDC Pump

Just Trying Some New Stuff

Final Renders of Res/Mobo Block Before Cut

Installing the PSU while Awaiting Parvum

FINALLY!! The Reservoir/Motherboard block has arrived!

Need Help With 24Pin Sleeving Design?!

Allmost Done Sleeving

Tubing Done! Ready to Fill the loop!

Done Filling The Loop, Now Bleed Testing






-------------------------------------------------------------------------------------------------



Teaser Of Latest Uploads :

Teaser%20Morpho_zpsnxypqn6d.jpg



blue%20%20morpho%20cover2_zpslok7jsnu.jpg












-------------------------------------------------------------------------------------------------


The Blue Morpho Specs :
  • Mobo: Gigabyte Ga-Z97N-WIFI
  • CPU: Intel Core i5-4690k
  • PSU: Super Flower Leadex Platinum 1000W
  • Memory: 2 x 8 GB of HyperX Fury 2133MHz
  • GPU: EVGA GTX 970 Superclocked ACX 4GB
  • SSD's: 250GB Samsung Evo 850(OS), 500GB Samsung Evo 840(Games)
Watercooling Parts :
  • Memory Blocks: EK-RAM Monarch X2 - Nickel and EK-RAM Monarch Module - Black (2pcs)
  • Tubing: EK-HD Tube 10/12mm 500mm
  • Pump: EK-XTOP DDC 3.2 PWM Elite - Plexi (incl. pump)
PSU Sleeving :
  • Sleeving: MFC TELEIOS 4MM SLEEVE and MFC TELEIOS 8MM/SATA SLEEVE
And off cause a connectors, terminals and MFC CUSTOM 18AWG WIRE – White


And Alot of other cool stuff, Pics will follow :)


-------------------------------------------------------------------------------------------------


Hope you guys like the renders and the design Idea :)


Will be making step by step pics of painting, sleeving and everything i do.


-------------------------------------------------------------------------------------------------


This Build Is Made Possible By:















-------------------------------------------------------------------------------------------------


Stay Awesome Bro's,

BeckModz - Liquid Designs
 
Laatst bewerkt:
The First Renderings​



Okay guys, first up is some renderings of the custom Reservoir/Mainboard tray,
that Parvum systems is currently working on for this project.
I really wanted to make a reservoir like this, to do as little bending and tubing as possible,
want to keep this build as clean as possible because of the small amount of space there is in this case. Also i want to use the backside of the reservoir/mainboard tray, as SSD mount and
also implement cable routing in it :)


Will get more renders soon i hope. If not then you just have to wait till the piece is here :D


12369822_10156314527670284_2145052240_o_zpsldqqfhus.jpg



Render%20MED%20SPONSOR%20LOGOER_zpssis4x1xd.jpg



12546140_10156434655770284_1252798473_o_zps4rqfczsr.jpg



12499513_10156434559835284_1346243596_o_zpshnbcsnqw.jpg





Am pretty happy with how this could turn out!...
I really enjoy working together with Justin and Shaun at Parvum Systems, these lads are amazing
at what they do, and allways impress me with their level of detail and skill!
Hope you like it !!​
 
The D-Frame Mini Before Paint​


Just a few images of the sexy In-Win D-Frame in it's original Red color.
Realy like the design layout of this little case, also like the red color, if i was doing a red themed build, but i'm not :)
So this good looking D-Frame Mini is heading off to powder coating!
Going to paint it white, or at least that's the idea so far :)




IMAG0510_zpsqrwdcrld.jpg



IMAG0520_zps6ncv6kmg.jpg



IMAG0511_zpsfpkqszom.jpg



IMAG0506_zpsdwjgtas7.jpg





Can't wait to get it back again, and get that GPU mount up and running on the PSU cover! :)
 
The Hardware​



This post is all about the hardware choices.
I chose an Intel Core i5-4690k because that's plenty of brains for this small project:) And i have had several i7-4790k's so time to see how the i5-4690k does on water :)
the EVGA Gtx 970 SC was chosen, mostly because i really loved the looks of the EKWB.com waterblock that was available for it :D And i'm allways all about the looks :D
Gigabyte hit me up with their GA-z97N-wifi mainboard, sexy little powerfull thing, but think i have to mod it a bit, to make it look just a tiny bit more beautifull. :)
The PSU .. Caseking and Superflower sent me the Leadex Platinum 1000w PSU. Overkill for the other hardware but what a powerfull beauty it is. Will show more of it when i get down to sleeving all the cables for this build :)
Anyways, here's the images of the hardware!




IMAG0264%20copy%20copy_zpslivux7ic.jpg



IMAG0358%20copy%20copy_zps5xy5cup6.jpg



IMAG0381%20copy%20copy_zps8vdarsdv.jpg



IMAG0372%20copy%20copy_zpspozk3dvu.jpg



IMAG0363%20copy%20copy_zpsqqmbhf2j.jpg



IMAG0377%20copy%20copy_zpszv8ync8b.jpg



IMAG0344%20copy%20copy_zpsv6zk6tom.jpg



IMAG0347%20copy%20copy_zpsxurqvo1b.jpg



IMAG0346%20copy%20copy_zpsg3bqrsxh.jpg



IMAG0345%20copy%20copy_zps3uoczg6w.jpg



IMAG0338%20copy%20copy_zpsdejejebs.jpg



IMAG0340%20copy%20copy_zpsbef0zp17.jpg



IMAG0311%20copy%20copy_zpsbxf0zttr.jpg



IMAG0336%20copy%20copy_zps76tufzkn.jpg



IMAG0326%20copy%20copy_zpsaagtfg7u.jpg



IMAG0324%20copy%20copy_zpskgmfp97c.jpg



IMAG0349%20copy%20copy_zpsqtzm3ifq.jpg



IMAG0352%20copy%20copy_zpsoafsymtt.jpg



Thats all for now! :)
 
The Sleeving​

Also, all these beautiful shades of blue looks so great! Will be a hard choice when i have to decide on a color pattern for the cables.


IMAG0594_zps0mxaybng.jpg



IMAG0603_zpsowuofilb.jpg



IMAG0668_zpsl5ww7vrv.jpg



IMAG0669_zpsllp8ro2s.jpg



IMAG0680_zpsqlfhyjah.jpg



IMAG0683_zpsdxnsoaly.jpg



IMAG0685_zpswlfh0x8v.jpg



IMAG0689_zpsb9joaeab.jpg



IMAG0690_zpshbejj4ax.jpg



IMAG0696_zpsvaylm8ks.jpg



IMAG0697_zpsqwolnrta.jpg



IMAG0719_zpstff5nnnm.jpg



IMAG0692_zpsle0qjmih.jpg



IMAG0725_zpsyftn8zme.jpg





Cant wait to get all the sleeving done and installed :D. Going to look so good!
Stay Tuned !!​
 
Laatst bewerkt door een moderator:
The New Gpu Mount​


So as mentioned, I didnt like the way the GPU was sitting in the Motherboard, with the fans facing the PSU and only the backplate shown.
I chose the EVGA GTX 970 SC ACX 2.0 because it had the best looking Water Block from EKWB.com, and obviously i wanted that beautifu block to be visible in the build.
So i tried a lot of different options, trying to figure out where and how it would be best shown. And came up with mounting it on the PSU cover/mount.
I first off meassured out the hole positioning, stripped the GPU down to test mount, drilled the 3m holes and Tapped them, and then mounted the GPU to see how it looked.
I must say, I'm pretty happy with the result! Once the Water Block is attached and filled with liquid, this is going to look amazing.


IMAG0747_zpsopw8crnh.jpg



IMAG0738_zpsxzgbdop0.jpg



IMAG0744_zpsueoa8z9m.jpg



IMAG0749%20copy_zps9o0yvoui.jpg



IMAG0755%20copy_zpssht06l9k.jpg



IMAG0753%20copy_zps4pkmwheq.jpg



IMAG0763%20copy_zpsadky1vhu.jpg



IMAG0765%20copy_zpscgvsbbgf.jpg



IMAG0768%20copy_zpseahu3hjt.jpg



IMAG0784%20copy_zpscxq4sana.jpg



IMAG0777%20copy_zpshgdoqy6v.jpg



IMAG0772%20copy_zps0crtr6dg.jpg



IMAG0786_zpsqxl4fty9.jpg



IMAG0789_zps8pfssank.jpg



IMAG0775%20copy_zpsysvhjis7.jpg





Sorry i was too lazy to remove the thermal paste before taking the pics lol..
Stay Tuned !!​
 
The Supremacy Evo and Ek-Ram Monarch x2​



next up is the "BrainFreezer" also known as the CPU water block.. The Supremacy Evo Nickel, again a high level of detail and sexiness gone into this part. Just looks so clean and stylish, like all other parts from EKWB.
And the Ram cooling block, the Monarch x2, also a beauty..
Have been thinking alot about modding the nickel plated copper parts in the edges of all the blocks, just give it another color or something, but let's se ..


IMAG0159%20copy%20copy_zpsi1guufyy.jpg



IMAG0184%20copy%20copy_zpsf7av1ntn.jpg



IMAG0171%20copy%20copy_zpssirtevc5.jpg



IMAG0607_zpsfb2yksmz.jpg



IMAG0609_zps3dxplnkv.jpg



IMAG0613_zpswsvl3aaj.jpg



IMAG0618_zpsguwb0phm.jpg



IMAG0615_zpsceoadwj0.jpg



IMAG0137%20copy%20copy_zps0hqa21cx.jpg



IMAG0150%20copy%20copy_zpslearzdrx.jpg



IMAG0634_zpsaeonyw2u.jpg



IMAG0622_zpstt6iotap.jpg



IMAG0633_zps4oiapki6.jpg



IMAG0624_zpsi7uwtnmk.jpg




Hope you like it !!​
 
The EK-FC970 ACX Nickel GPU Block


This is the sexy GPU block i was talking about, and the main reason why i went with the GTX 970 SC from EVGA.
I mean just look at this beauty! absolutely amazing design and work by EKWB.com on this one.
Will put up more images of it later, maybe a test to see the looks with the Mayhems Fluid in it :)
Also i am thinking of maybe doing some work on the frame of the water blocks, painting them or using vinyl to make a pattern.


IMAG0530_zpss6jmonis.jpg



IMAG0558_zpslcd75j1p.jpg



IMAG0554_zpsrjm67ad2.jpg



IMAG0572_zps99rjux75.jpg



IMAG0570_zpsfacvwixs.jpg



IMAG0654_zpsgohqjfbq.jpg



IMAG0646_zpsmkfupfyv.jpg



IMAG0650_zpsfghkvov4.jpg



IMAG0641_zpsodr7xe18.jpg



IMAG0642_zpsh2nuuelh.jpg



Will put up more images when i mount the block on the GPU :)
Hope you like it !!​
 
The EK Vardar Fans Before Paint​


Since EKWB.Com shipped me allmost everything i needed to cool his project,
i felt i had to try these beauties out. Have heard so many positive reviews on them, and decided to give them a go.
Original idea was that i wanted either dual 240mm rads, or a single 240 in push/pull, so that's the reason why there's 4 fans :)
but since my effin brain never stops getting new ideas, i decided to only use 2 of them,
and instead mount the pump on the other side of one of them :)..
Anyways, here's a few images of the beauties before i rip them apart and start painting and sleeving them :)


IMAG0286%20copy%20copy_zpsdxahnnrz.jpg



IMAG0288%20copy%20copy_zpsbhzdvvid.jpg



IMAG0291%20copy%20copy_zpsafb9zqbg.jpg



IMAG0289%20copy%20copy_zpsgwojwkbu.jpg



IMAG0297%20copy%20copy_zps6cny0zyf.jpg



IMAG0301%20copy%20copy_zps8kh19sdk.jpg



IMAG0305%20copy%20copy_zpsiuuserfe.jpg




Hope you like it !!​
 
Ek Vardar Fans After Paint​


Was not sure how i wanted the Fans to be painted.
They will not be shown much in the build, so just decided to paint the blades white instead of the stock gray color.
Also got some skye blue vinyl sticker, that i might cout out in circles and put in the middle of the fan blades later on,
Maybe when i do the sleeving of the fans.
To dissasemble the fans, i removed the sitcker, and carefully removed the small locking mechanism that holds the bearings and spacers.
Might be hard to see the difference, but there is one..




IMAG0005%20copy_zpsecun4xul.jpg



IMAG0010%20copy_zpsoouvzgpk.jpg



IMAG0015%20copy_zpse8px4jc8.jpg



IMAG0024%20copy_zpsftsmyjzu.jpg



IMAG0045%20copy_zpsk3wwi8rt.jpg



IMAG0049%20copy_zpskn68wuhj.jpg



IMAG0069%20copy_zpsymz7eehp.jpg



IMAG0071%20copy_zps6lta5kgd.jpg



IMAG0072%20copy_zpsqzgfarkj.jpg



IMAG0075%202%20copy_zpsqefnccev.jpg



IMAG0081%20copy_zpsdauifgtx.jpg






stay tuned !!​
 
Monarch Module And EK-Supremacy Evo before and After paint​


So i was unsure about if i should paint the Ram modules or not, and decided to go for the white paint.
pretty happy with the result, but can see a few air bubbles, so have to redo one of them, and will probably also change the badges to new ones later.
I used a heatgun on the EK logo badges to remove them with my knife, and then grinded them a bit with sandpaper, before primer, and white paint.
Sorry the images makes them look more gray ish, but they really are bright white..
More images will come later when i mount them on the ram sticks.


On the Supremacy Evo, I decided to paint the black mount white instead.
Original idea was to cover it with white vinyl sticker instead, but since i was allready painting the fan blades and the Monarch modules,
i thought, why the hell not, let's paint this bad boy ..
Really looks great now, with white base, white fittings, OH and will include a single image teaser of it with liquid (Mayhems Pastel Blue).




IMAG0054%20copy_zps1ghyh334.jpg



IMAG0060%20copy_zpsjveyasfy.jpg



IMAG0061%20copy_zpsqadbdcwl.jpg



IMAG0083%20copy_zpsuo2bfqw0.jpg



IMAG0085%20copy_zpsn5tz8pff.jpg



IMAG0087%20copy_zpsvwelgvht.jpg



IMAG0088%20copy_zpsgvt5xfk4.jpg



IMAG0086%20copy_zpslxifcbid.jpg



IMAG0064%20copy_zpszwyi3mjk.jpg



IMAG0128%20copy_zpsviqvb1j5.jpg



IMAG0135%20copy_zpskeacmjw6.jpg



IMAG0136%20copy_zpswwx4jxv6.jpg



IMAG0142%20copy_zpsodrodb7y.jpg



IMAG0016%20copy_zpsprummxul.jpg






Hope you like it !!​
 
Mayhems Pastel Blue​


The fluids finally came in from Mayhems.co.uk .
My choice of fluid was the mayhems pastel blue, because i think it was close to the blue color on the wings of the butterfly "blue morpho" hence the name of the build :)
I just couldn't help myself, i had to see how it looked in the GPU block from EKWB.com, and also the freshly painted Ek-Supremacy Evo..
And WOW, looks amazing! the combination of blue and white is just beautiful!
Enjoy :)


IMAG0095%20copy_zpslx0dmhc3.jpg



IMAG0099%20copy_zps1rcc7zof.jpg



IMAG0106%20copy_zpscdqzk5tl.jpg



IMAG0102%20copy_zpsnllwrdc6.jpg



IMAG0116%20copy_zpscjejla8y.jpg



IMAG0123_zpslk4dgbr4.jpg



IMAG0112%20copy_zpsuh5u0sqv.jpg



IMAG0045%20copy_zpsdrwzoqx0.jpg



IMAG0127%20copy_zpsiykjb0p6.jpg



IMAG0114%20copy_zpskl1nitqi.jpg



IMAG0046%20copy_zps3tqczqos.jpg



IMAG0016%20copy_zpsprummxul.jpg



IMAG0020%20copy_zpslivhof1q.jpg



IMAG0063%20copy_zpsc7tjgznz.jpg



IMAG0026%20copy_zps3xzmekvb.jpg





Stay Tuned For More Great Images Soon <3 !!​
 
Installing the EK-Ram modules, and the EK-Ram Monarch x2​


So today i took my time to remove the heat spreaders on my 2 x 8GB HyperX ram sticks,
and installed the EK-Ram Monarch adapter modules instead.
After installing the new heat spreaders, i decided to install the EK-Ram Monarch x 2 waterblock as well,
and obviously i just couldn't help myself, and had to fill it up with some of that beautiful looking Mayhems Pastel Blue.
Amazing!! the blue and white colors just look so good together!,,
Seriously can't wait untill everything is installed in the frame, and it's time to fill that bad boy up!.


IMAG0095%20copy_zpsksdknqxn.jpg



IMAG0103%20copy_zpsdlbyv982.jpg



IMAG0106%20copy_zpsjarkd8at.jpg



IMAG0117%20copy_zpsi1awmx0f.jpg



IMAG0120%20copy_zps6d2ci4l7.jpg



IMAG0121%20copy_zpsykcgmhl0.jpg



IMAG0122%20copy_zpsbqxxp6kj.jpg



IMAG0133%20copy_zpsyj8nenvi.jpg



IMAG0175%20copy_zpsawle9khg.jpg



IMAG0197%20copy_zpsoo5qdqpm.jpg



IMAG0216%20copy_zpsxlkizird.jpg



IMAG0213%20copy_zpsip47pykh.jpg



IMAG0227%20copy_zpslev9jc5k.jpg



IMAG0202%20copy_zpsioysx8vw.jpg



IMAG0193%20copy_zpsxl6i7ilz.jpg




picking up the frame from paint on monday, and then new images heading your way!!​
 
Some Goodies On The Way​


So i have some goodies on the way from my friends at E22.Biz
Some engraved parts, SSD covers, Psu side covers, Radiator Grill and some other great stuff.
Will obviously take alot more pictures when the goodies arrive and are being installed.
This post is just a small teaser, and sorry for the image quality, i didn't take the photos,
and was poor light in the work shop.


12825271_10208907157224104_1542228904_n%20copy_zpsnytfkjnp.jpg



12834691_10208907154184028_542736295_n%20copy_zpsrq5ab9wn.jpg



12834571_10208907154664040_1005383298_n%20copy_zpsf7d9lgbe.jpg




Stay tuned for better photos once the parts are here.​
 
The DDC Pump, And New Footstands From In Win​


So today i recieved the EK-XTOP DDC 3.2 PWM Elite Pump from EKWB, and also IN WIN sent me Blue rubber Footstands for the D-Frame Mini,
replacing the Black ones that came stock with the red frame when i bought it.
I will add a few images of them mounted on the white frame before i gave it the final 2 layers of paint earlier today. So just to see how it looked.
I am debating on what to do with the nickel plated housing for the pump, and thought about painting it white, but also thought on using white vinyl wrap instead.
Will see what i decide on tomorrow. Have some more vinyl things to do for the build as well, but update will follow on that later.




IMAG0287%20copy_zpsre0n6eom.jpg



IMAG0291%20copy_zpszptpfktc.jpg



IMAG0295%20copy_zpsfohby9h0.jpg



IMAG0303%20copy_zpsozy9njab.jpg



IMAG0299%20copy_zps18xiboxz.jpg



IMAG0273%20copy_zpsebyjvpkp.jpg



IMAG0274%20copy_zpsyg2in6ql.jpg



IMAG0279%20copy_zpsj9cv7f1i.jpg



IMAG0278%20copy_zpsh1yehcqg.jpg



IMAG0254%20copy_zpshyajnv8j.jpg



IMAG0262%20copy_zpsur1ptzl2.jpg



Stay tuned for tomorrows updates! finished painting the frame today, and it's drying over night.
Will put up images of it tomorrow.​
 
Painting The IN WIN D-Frame Mini​


So at first i had the frame sent to Powder Coating, but when i came to pick it up it was looking white cream with pink spots all over the place!
Obviously i was very unsatisfied with their result, so i went out and bought some spray paint and re painted the whole thing.
Took me a long time to sand it down, gave it a layer of primer, and 4 layers of the Glossy White spray paint, before i had covered up all the pink and was satisfied with the result.
The IN WIN D-Frame Mini is now hanging over night for drying, and I will see tomorrow morning if it needs an extra layer or not.
Anyways here's a few images of the paint process, and my cool paint setup :)


Had some fun with one of the photos, obviously i did not spray inside while taking a picture, just had a little fun in photoshop and threw some fake spray in the image hehe.


IMAG0323%20copy0_zpsitqpvvwe.jpg



IMAG0325%20copy_zpsch5ixtwy.jpg



IMAG0312%20copy_zpsbqfugl0r.jpg



IMAG0327%20copy_zpsf93ptj53.jpg



IMAG0314%20copy_zpskefawgsu.jpg



IMAG0328%20copy_zpsufflevbw.jpg



IMAG0330%20copy_zpsujjyudve.jpg




What do you think of my paint setup? Used an old frame for hangin clothes on, tied up some 550 paracord and i had my self a great workstation for the paint job!!
Will upload images tomorrow of the finished paint job.​
 
IN WIN D-Frame Mini After Paint​


So yesterday i gave the frame the last layers of paint, and let it hang to dry over night.
This morning i took it down, put on the new Blue Rubber Foot Stands that i recieved from the nice guys at In Win, and took some images.
I must say that i absolutely love the new paint job! Cant wait to see what it looks like with the custom reservoir and the new GPU mount location.
Also nate at E22.biz just finished some laser engraved parts that are on the way. More updates will follow soon.


IMAG0336%20copy_zpsxlwdneri.jpg



IMAG0340%20copy_zpsckyddjwr.jpg



IMAG0342%20copy_zpsjyzz59ig.jpg



IMAG0346%20copy_zpsufvvzwyx.jpg



IMAG0357%20copy_zps4blz2z8h.jpg



IMAG0352%20copy_zpsje5j2ai1.jpg



IMAG0361%20copy_zpsvcmogxgc.jpg



IMAG0364%20copy_zpskm03dbzy.jpg



IMAG0369%20copy_zpswn0armw7.jpg




Hope you like it !!​
 
Vergelijkbare onderwerpen
Onderwerp starter Titel Forum Reacties Datum
M [Build Log] Project Blueberry Apple G4 Cases en Modding 24
F Builg log Project Saber Gallery & Build Logs 4
bmawn [Project log] Project Dark Knightmare Gallery & Build Logs 31
BeckModZ [Project Log] "Parvum|Beast" - Semi Sponsored Build Gallery & Build Logs 63
iSP Project muziekstreamer Gallery & Build Logs 10
ThomasJS Project SteelOak Gallery & Build Logs 18
Bl4ckj4ck666 Project Antec P120 crystal Gallery & Build Logs 22
Mannekino Custom loop kerstvakantie project in O11 Dynamic XL voltooid met Direct Die cooling voor een 9900K Gallery & Build Logs 9
Tath Project D Gallery & Build Logs 91
tijgervarken Project Ti[ger]tanium Gallery & Build Logs 1
Silversurfer Even voorstellen: Project Silversurfer Evo Introductie: Stel jezelf en jouw PC voor 1
M mindwarper - Chris - AMD Ryzen 3000/5000 Project Introductie: Stel jezelf en jouw PC voor 4
iSP Geschikte waterkoeling cpu bracket gezocht voor project Overige Koeling 7
Bokeh Bokeh - Ben - mijn monster PC project met RGB Introductie: Stel jezelf en jouw PC voor 11
Subarist [BIP] Project X | Scratchbuild | Gallery & Build Logs 0
Subarist | BIP | Project Subi | Personal Case | PCFixerLimburg Gallery & Build Logs 15
Subarist Subarist - Maickel - Project Subi Introductie: Stel jezelf en jouw PC voor 9
Rammstation Even voorstellen : Rammstation project: Rammstation Introductie: Stel jezelf en jouw PC voor 7
Dima Dima - Project: 7980xe Custom Loop Introductie: Stel jezelf en jouw PC voor 8
987Overlord 987Overlord - Paul - Project: Beest Introductie: Stel jezelf en jouw PC voor 5
vincent Project Back in busines Gallery & Build Logs 42
Kevin Kevin - Kevin - Project: Kraken Introductie: Stel jezelf en jouw PC voor 6
Hightower Project S Gallery & Build Logs 6
anub1s18 NZXT H440 project overkill Gallery & Build Logs 5
PasLis Project Car Gallery & Build Logs 29
vincent Project "vocht probleem" Gallery & Build Logs 9
Maarten/Pine Scratch-build ''Project Metallurgy'' Gallery & Build Logs 36
iSP [Gezocht] Simpel (goedkoop) ITX bordje voor project Gevonden 4
bunbun casemod project "red elegance" Gallery & Build Logs 11
Y Yodabear - Maikel - Project: LeBlanc Tower Introductie: Stel jezelf en jouw PC voor 5
C Corsair Crystal 570x Project 'Hot Rod' Gallery & Build Logs 0
C Sven Decommer - Project Blue-Ice Gallery & Build Logs 4
C Sven Decommer - Project Blue-Ice Introductie: Stel jezelf en jouw PC voor 1
P Project simply black & white Gallery & Build Logs 5
Maarten/Pine Project Cu - a watercooled PC desk Gallery & Build Logs 52
tijgervarken Project Black Matter Gallery & Build Logs 23
M Project reDefine R5 Cases en Modding 0
ProAce Project 303 Gallery & Build Logs 16
Demolisher Kodiak [Long term project] Cases en Modding 45
T Hulp bij budget waterkoeling project. Advies Waterkoeling Setup 2
T Hulp bij toekomstig project Waterkoeling 0
FactoryDefaults Project Stormtrooper Gallery & Build Logs 30
2kPro [WorkLog] Project Scarlet|Ti Gallery & Build Logs 39
J Project minimal. Gallery & Build Logs 9
DBRichard Project Deadpool: Merc with a Mouth Gallery & Build Logs 41
S Project ICE - (custom PC Desk Build) Gallery & Build Logs 4
J Project - LiquiDesk Gallery & Build Logs 7
DutchMicro Project HighTech Slaapkamer. Overige Builds 26
ProAce Project Z by ProAce Gallery & Build Logs 14
tehurtaget [Buildlog] Project S235 Gallery & Build Logs 3

Vergelijkbare onderwerpen

Terug
Bovenaan