JP[D]: Ikea Jerker PC Desk....

[JaPeMo]

SPONSORS




Hi Highflowers

Recently I finished JP[0] with Caselabs Mercury S8. I was very occuped with work, travels and more work. Now, it's done.

And I have new mod.

This is my third worklog, being BnB and JP[0] the first two and in that order. Now it's a chance to do something great and that every day is not seen a desk with integrated PC. A worklog I'm projecting / starting, JP[D] and that is already underway.

It is a PC-Desk mounted on a base table IKEA, model Jerker. Which only the metal escrutura be retained. Everything else, this changed.

The PC anger on a lower floor in a removable drawer if necessary and an ornate smoked glass 8 / 10mm. With 2 almost symmetric circuits except for the area of ​​hardware, one will GPUs and the other CPU, motherboard and RAM.

Plus, Desk will have two shelves that will hide with telescopic guides to use as bases, either mouse, joy ... or in my case, a HOTAS to SIMS.

Photos from start...

Installing guides for HOTAS...

Side stand for active monitor Rokit KRK 5...

Yeah, are good?

OMG!!!! FAKE!!!


Paint:

TRY 2: Side Stand for KRKs

I found this...

Compared...

FINISHED!!!

Ok. Now, buil wood tables for box to insert PC. I built DM in 10mm.

Paint for box...

Sample:

A box sketch:

​

House Paint tunel

Painting KRKs Supports

All organized...

First package...

More pieces...

I will use CF Hard Tube Adaptor G1/4 male to 12 mm fittings.

Second package direct from Aquacomputer... Aquaero 6

Frontplate for aquaero 5 and 6 PRO aluminum black conserved from 5.

Passive heat sink for aquaero 6, black

New dremel, for new project...

I do a first count... 50 fittings... OMG!!!

See you soon!!!​

 

[Brutus83]

i am looking on this one

 

[z999]

Als je muziek gaat maken zou ik toch een ander systeem kiezen voor je speakers

 

[JaPeMo]

Thx but I don't do music, only for movies, music and games...

 

[JaPeMo]

New Sponsor:

​

Thank you so much to Ibercool By Trust me

Regards

RETIRED!!!

 

[mixedup]

cool men i wil follow it

 

[JaPeMo]

cool men i wil follow it

THX!!!!

Goor morning Highflowers!!!!

The last night I done trys of resistance for screws and DM...

After, I marked all pieces and presented all component for look If I done correct sketches in paper...

Good job!!!

Now, go to the war...

 

[JaPeMo]

Hi!!!

Today's work Saturday

A cut to run wires from the front to the back

And finish...

The L brackets that support on the structure

kind regards!!!

 

[JaPeMo]

Hi. More photos from weekeend...

Regards!!!

 

[JaPeMo]

Good night

Today I worked up panel... first Us for panel...

After to look measures and cutting...

Modifing back shield from Mountain Mods

Finished...

Now cut midle panel...

And for Aquaero 6

Presented components...

To be continue...

 

[JaPeMo]

Update from weekend!!!


Middle pannel...

Sides...

After. I continued with back, cutting for wires...

After, clean my workplace and ordered...

Regards!!!

 

[JaPeMo]

A little update...

Thanks to...

​

 

[JaPeMo]

Hi, I come with updates from weekend.

Grill in stainless steel

Don't finished. I don't have covers. I'm waiting to build or buy. O don't know.

I continued with Aquacomputer filters, cutting base...

Partial distribution

Regards

 

[JaPeMo]

Well today I had unlocked several issues pending.


1. The covers for the racks.
And they are responsible for me to do in the laser. I hope to meet them soon to end the grids.


2. Graphics.
In the end I decided for 970 SLI, the GeForce GTX 970 KFA2 EXOC Infin8 Black Edition, 4096 MB GDDR5.


3. RL blocks.
This was a pending issue, as only could attach blocks known manufacturers if they were a reference.


He was an outstanding issue which has been unlocked. In the end I had to make a decision between two manufacturers of blocks.


Here, you get off the car Ibercool had no news of them in a waiting week and has risen for the interest, motivation and ease to continue the mod according to which it was seeking. Therefore I welcome my new sponsor that will be me that I manufacture custom blocks for these graphs with some details that will make them unique.

So the graphics will direct path to take action, making 3D model, making the block and studio performance for the finishing touches. This will take to get there, but worth it.


We continued ...

 

[JaPeMo]

Good night a small advance.


I'm doing a custom supports for deposits. Tomorrow will be finished at moment the clamps

Regards!!!

 

[JaPeMo]

If you liked the clamps, because males agarraros comes the second part. Anchor brackets ...

Next to the warehouse before you can see the motherboard supports SSDs also manufactured in acrylic and like iran positions with the wiring to the motherboard.


Well, now I wonder, do you remember of the top ceiling? It's time to reveal this secret.


This soffit is provided with a mirror coating 2mm

Followed by a layer of transparent acrylic 10 mm and a layer of smoked 3mm

And all this for what? Did not you know yet? Because a picture is worth a thousand words ...


I. Test I add a layer of dark moons film stuck to the transparent acrylic

Result, poor lighting.


Test II. Retirement film.

I get more light, but not uniform as want.


As you have discovered, this plafon hid material to make a light box at the bottom of the desk. This is composed of different materials, reflective, a diffuser and a top layer. I wanted to try first before any part retorcar to know how illuminated the matter.


Tomorrow touch sanding testing scraps that I have, do grids and replace film in case you get a very strong lighting.


O is a video of the test.

 

[JaPeMo]

The last try...

Tomorrow, I will have a hard work!!!

 

[JaPeMo]

I bring some small progress.

Tacos to replace the original structure

The tube well at first going to put copper tube, but the other day at Leroy Merlin, my second home, I took a bar of 1 meter, and I said adding that the entire tube weigh much, that added to all the others I consider it much longer for the structure will have to reinforce to avoid shocks. So in the end I shot the acrylic 12/10

I'll show in the end that as has been the effect of light. With the camera you really notice the illuminated part and no longer automatically adjusting the lighting, but really, is more uniform than in the video ...

And finally, the covers. Assign a laser-cut covers for the exterior grilles ...

Who stuck to the grates ...

Right now they are being subjected to a session of painting. Soon more ...

Update ...

Now wait it dry and place the filters and you will be ready grids.

Regards!!!

 

[JaPeMo]

Good afternoon.


I finally finished the grids with dust filters. I put some pictures of how they have been

Regards!!!

 

[JaPeMo]

Hi!!!! Good night.

Today I received RGB led strip and I put in lightbox...

Red:

Green:

Blue:

White:

A little video:

The box have 2 RGB led strip, Everyone connect and controlled with farbwerk, the light, are the delta (liquid temp before enter first rad / ambient). Every strip with his delta from every circuit.

Regards!!!