Specificaties:
SWITCH, VANDAL RESIST WHITE RING
Switch function type:SPNO
Voltage, contact DC max:24V
Temp, op. max:70°C
Temp, op. min:-30°C
Diameter, panel cut-out:19.2mm
Length / Height, external:31mm
Depth, external:11mm
Colour:Blue
Current, contact rating:50mA
For Motherboard LED header connections, which are typically 3.3V (however, some motherboards differ from this standard), note the following:
AMBER LED is rated for 2.3 Volts. Please add a 56 Ohm Resistor for this application.
BLUE LED is rated for 3.5 Volts. Resistor is not required.
GREEN LED is rated for 3.5 Volts. Resistor is not required.
RED LED is rated for 1.85 Volts. Please add an 82 Ohm Resistor for this application.
WHITE LED is rated for 3.6 Volts. Resistor is not required. <<<< deze gebruik ik
Note, where required, 67 Ohm resistors may be used as an alternative.
Diameter, bezel:22mm
IP rating:IP66
Luminous intensity, typ:1500mcd
Resistance, contact:100mR
Resistance, insulation:1000MR
Terminal type:Screw
Voltage, forward at If:3.4V
Technical Data Sheet (61 kB) EN
