Bitspower D5 Mod Kit / Mod Top / D5 Dual Single Top Upgrade Kit 150 Installed Height

[memoryJam]

Hi Guys,

I hope it's okay to create a post in English.

I'm planing on purchasing the following from Highflow:

Bitspower D5 Mod Kit Black Sparkle
Bitspower D5 MOD TOP - Clear "S" Model - BP-D5TOPACS-BK
Bitspower Dual / Single D5 Top Upgrade Kit 150- Clear BP-D5TOPUK150AC-CLCL


I'm going for the following config to be mounted vertically in a Fractal define S:

I'd like to know what the total height is of this entire configuration. I'm trying to work out whether to purchased the upgrade 150, or 250 but need to know the total installed height?

I'll try to leave another 5-10cm on top clearance so i can access the fill port, and so the look can return to reservoir.

Thanks guys

 

[Thierry]

I've got te 150mm version and the height is 27cm's

 

[dosda3]

note: The picture is of the black mod top and the black upgrade kit, the highflow links are of the clear mod top and clear upgrade kit. I don't know which one you like, but remember to pay attention to it when you want to order it

 

[memoryJam]

thanks so much for the info.

Yep, i'm after the all acrylics version Assuming the 250mm version has a total height of 37cm then i'd only have clearance of 5cm above the reservoir for the inlet feed. It would go higher than the 240mm radiator mounted at the top, so the outlet of the cpu block would have to go across, up, and back down into the reservoir - not ideal as i'm using acrylics straight tubbing coupled with bitspower fittings.

the 150mm is probably more suitable, here's a rough mockup of what i'm planning, i think the 150mm will work: